To Next PageTo Next Page
Need help?Do you have a question about the Trane UC1B060A9361A series and is the answer not in the manual?
General| Model Number | UC1B060A9361A |
|---|---|
| Category | Furnace |
| Ignition Type | Hot Surface Ignition |
| Fuel Type | Natural Gas |
| Input BTU | 60000 |
| Stages | 1 |
| Warranty | 5-Year parts |
| Blower Type | Multi-speed |
| Output BTU | 57, 000 BTU/hr |
| Heating Capacity | 57, 000 BTU/hr |
Essential safety guidelines for installation, servicing, and operation of the furnace.
Critical warning about CO poisoning risk due to improper venting procedures.
Warns of serious injury, death, or property damage from improper handling or servicing.
Criteria for selecting the furnace installation site for optimal performance and accessibility.
Specifies minimum clearances to combustible materials for safe operation.
Details airflow needs and potential obstructions for safe furnace operation.
Explains air supply requirements for different installation space types.
Table specifying required clearances for furnaces in different locations.
Explains Category IV venting system features like positive pressure and tightness.
Maximum allowable vent and inlet pipe lengths for upflow/horizontal configurations.
Maximum allowable vent pipe lengths for downflow/horizontal configurations.
Specifies clearances required for direct and non-direct vent terminals based on location.
Specific MA requirements for CO detectors and signage for side wall vented appliances.
Critical safety warning regarding propane gas hazards, especially in low areas.
Lists common furnace issues like flame loss, power failure, and their resolutions.
Table listing error flash codes and their troubleshooting meanings for diagnostics.
