Trane WCP036F1 User Manual

Page 8
8
7
NOTE: The inner perimeter of the Drip Lip on all
units should be flush with the outer perimeter
of the curb on the two sides shown here. See
Figure 2 for the location of the unit overhang
on the WCP036-060F Models with
BAYCURB030A,038A.
SPREADER BARS
OUTDOOR COIL
END OF UNIT
GASKET SEAL
BASE OF UNIT
REST ON TOP OF
CURB RAILS
DRIP LIP
DIMPLE
BAYLIFT002A
LIFTING LUGS
SEE DETAIL “A”
“B”
“A”
DRIP LIP ON
PERIMETER OF UNIT
UNIT CORNER
CURB CORNER
EXISTING
SHEET METAL
SCREW
HOLD-DOWN
BRACKET WITH
CURB
FLANGE OF
CURB
“A”

Trane WCP036F1 Specifications

General

Brand	Trane
Model	WCP036F1
Category	Heat Pump
Language	English