Need help?Do you have a question about the Trane XR 13 and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| HSPF | Not Applicable |
| Stages | 1 |
| Type | Air Conditioner |
| Warranty | 10 years limited |
| Compressor | Single Stage |
| Cooling Capacity | 1.5 - 5 ton |
| Compressor Type | Single-stage |
Detailed technical specs for various models, including electrical data, coil type, dimensions, and optional accessories.
Sound power levels measured in dB(A) for different frequency bands across various unit models.
Explains the function, application, and benefits of optional accessories for the Trane unit.
Defines the standard conditions used for rating cooling and heating performance according to ARI standards.
Explains the specific coding conventions for Trane's outdoor split system units.
Details the model coding for Trane's high-efficiency furnace line.
Describes the model coding system for Trane's residential air handler units.
Explains the model coding for Trane's heat pump and cooling coil products.
Provides detailed electrical wiring diagrams and component layouts for unit operation and troubleshooting.
Visual representation of the unit's physical dimensions, including key component locations and clearances.
Unit is fully charged, designed for outdoor use, and ARI certified for various indoor matches.
Unit casing is heavy gauge galvanized steel, painted, with a weather-resistant powder paint and DuraTuff™ base.
Controls include condenser fan and compressor contactors; high/low pressure controls and liquid line dryer are standard.
Features internal over temp/pressure protector, total dipped hermetic motor, and thermostatically controlled sump heater.
Continuously wrapped, corrosion-resistant aluminum coil with minimum brazed joints and 3/8 inch O.D. seamless aluminum.
Standard cooling to 55°F; 30°F with defrost control; 0°F with low ambient kit and TXV.
Includes options like thermostats, evaporator defrost control, and outdoor thermostats for extended operation.
To Next Page