Ithaca
®
9800 Specifications and Requirements
Page 20 100-13732 - Rev B
Environmental Conditions
The Ithaca
®
9800 is designed to be placed on a flat, stable surface. Be aware
that the environmental conditions of the location where you place the printer
will have an effect on the printer’s performance and longevity. The printer will
run its best when stored and operated in an environment that meets the
temperature and humidity conditions described below.
Temperature:
Typical Operating: +5 to +50 °C. (41-122 °F)
Storage & Shipping: -10 to 50 °C. (14-122 °F)
Humidity:
Operating: 10 to 90% RH (non condensing)
Storage & Shipping: 10 to 90% RH (non condensing)
Electrical Specifications
90 VAC - 265 VAC, 47-63 Hz
Reliability
Print Head Life – 50KM
Media Specifications
Label thickness: .0065 - .0075 inches thick, including liner
Label Roll Diameter: 4 inches (101.6mm max)
Label Dimensions: Adjustable, 1 inch and 2 inch nominal widths
Adhesives
Permanent
Freezer Grade
Dissolvable
Removable
Nutritional
To Next Page
Loading...