Ithaca
®
9800 Specifications and Requirements
100-13732 - Rev B Page 21
USB Interface
The USB interface is a Version 2.0 host interface with a standard Series "A"
receptacle as defined in the USB Specification.
The standard USB Type A connector has the following pin functions:
Pin Signal
1 Vbus (+5 V dc power for external devices @ 500mA)
2 Minus data
3 Plus data
4 Ground
Note: The standard USB interface does not have sufficient power to run the
printer.
Regulatory Compliance
FCC Class A
RoHS
EN55022 Class A
CE Mark (1998) Class A FCC Class A
EN55024
ISTA
Energy Star
To Next Page
Loading...