Transcend DrivePro 230 - Getting Started; 4-1 Overview; 4-2 Inserting a microSD Memory Card

6
4. Getting Started
4-1 Overview
4-2 Inserting a microSD Memory Card
You must insert a microSD memory card into the DrivePro™ before you can start recording. Please
use a MLC-based microSD memory card with 8GB, 16GB, 32GB, 64GB or 128GB capacity (Class 10 or
above).
1. Insert a microSD memory card into the appropriate card slot on the left-hand side of the
DrivePro™.
Note: Always format new memory cards in the DrivePro™ before using them for the first
time. To format a new memory card, press the Settings button during recording, and select
Format Card. For best recording stability, you are suggested to format the microSD card
every 3 months.
WARNING: DrivePro 230 can only support FAT32 and exFAT file format, but not
NTFS.
LED Indicator
2.4” LCD Display
Emergency
Button
Lens
Bracket
Socket
Memory Card
Socket
USB Connector
Speaker
Microphone
Function
Buttons
Reset Button
GPS
Receiver