Transcend DrivePro 230 - Connecting to Power

8
3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the
DrivePro™ to the windshield.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro™’s
position.
5. After the DrivePro™ is in the best position, turn the adjustment knob clockwise to make
sure that the DrivePro™ is securely locked in place.
4-4 Connecting to Power
Note: Insert a microSD memory card before connecting the DrivePro™ to your car’s lighter
socket.
1. Connect the small end of the car adapter to the USB connector of the DrivePro™.