1. Recording status indicator
After the car engine is switched on, the DrivePro™ will automatically turn on and start recording.
By default, one video file is saved for every 3 minutes of recording. To adjust the recording length,
please refer to the Settings section in this manual.
After the car engine is switched off, the DrivePro™ will automatically save the current recording and
Note: Lighter sockets of some types of vehicles will still supply power after the car engine is
turned off. If your car is of this type, please unplug your car video recorder from the lighter
socket to avoid unnecessary power consumption and unexpected issues.
During video recording, press the emergency button on the left-hand side of the DrivePro™ to
manually activate emergency recording mode.
To Next Page