EasyManua.ls Logo

Transcend DrivePro 520 - Detailed Menu Option Explanations

Transcend DrivePro 520
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Menu Options
Resolution: Set the resolution/quality for video recording (front lens+rear lens).
Available options: FHD+480P / 1080P+720P / 720P+720P
Exposure Value: Adjust exposure composition value to lighten or darken the preview screen.
Available options: +2.0 ~ -2.0
Video Length: Set the recording length of each recorded video file.
Available options: 1 min / 3 mins / 5 mins
Video Stamp: Display the current time of the event or GPS information of the video being
recorded.
Available options: Disable / Enable
G-Sensor: Adjust the sensitivity of the G-Sensor.
Available options: Disable / Low / Medium / High
Microphone: Turn on/off the microphone during video recording.
Available options: Disable / Enable
Volume: Set the speaker volume level.
Available options 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 (Choose 0 to switch on Silent Mode)
Display: Display both lenses or the front / rear lens only.
Available options: Front / Rear / Both
Auto Display Off: Set duration for display to automatically turn off after recording begins.
Available options: Never / After 1 min / After 3 mins
Delay Power Off: Schedule the DrivePro to shut down at a certain time.
Available options: Disable / 10 secs / 30 secs
Date/Time: Set the current date, time, format and time zone.
Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Available options: 50Hz / 60Hz
GPS Status: Display the number of GPS satellites received and GPS signal intensity.
Navigation System: Select a navigation system according to your preference.
Available options: GPS / GLONASS

Related product manuals