Transcend DrivePro 550 - Inserting microSD Card

7
4-2 Inserting a microSD Memory Card
You must insert a microSD memory card into the DrivePro before you can start recording. Please
use a microSD memory card with 8GB to 128GB capacity (Class 10 or above).
1. Insert a microSD memory card into the appropriate card slot on the bottom of the DrivePro.
Note: Always format new memory cards in the DrivePro before using them for the first time.
To format a new memory card, press the Settings button during recording, and select
Format Card.
Format your memory card on a regular basis. For the best recording stability, you are
encouraged to format the microSD card regularly. DrivePro™ will send you a notification
every three months as a reminder. Upon receipt, press to begin formatting
immediately; press to resume without taking actions. Notice: Formatting will erase
all data on the memory card.
WARNING:
1. DrivePro 550 supports the FAT32 and exFAT file formats, but not NTFS.
2. Make sure the allocation Unit Size of the microSD card is 32 KB or larger; if not, the
DrivePro will format the card before recording.
 The following table shows approximate recording time according to capacity and resolution
(for reference only):
DrivePro
Frame Rate
Card Capacity (FAT32)
16GB
32GB
64GB
128GB
DrivePro
110
Full HD 1080P 30fps
3 hrs
6 hrs 30 min
13 hrs 30 min
27 hrs 30 min
HD 720P 30fps
4 hrs
9 hrs 30 min
19 hrs 30 min
40 hrs
DrivePro
230
Full HD 1080P 30fps
2 hrs
4 hrs
8 hrs
16 hrs
HD 720P 30fps
3 hrs 30 min
7 hrs 30 min
15 hrs
30 hrs
DrivePro
550
Full HD 1080P + 720P
30fps
1 hr 30 min
3 hrs 30 min
7 hrs 30 min
16 hrs
HD 720P 30fps +
720P 30fps
2 hrs
4 hrs
9 hrs
19 hrs