Transcend DrivePro - Page 24

23
Resolution
Set the resolution/quality for video recording.
Available options: FHD / HD
Video Length
Set the recording length for each recorded video file.
Available options: 3 mins / 5 mins / 10 mins
Buffered Video Length
Set the buffered video length to record footage that happens
prior to switching to Recording mode.
Available options: 30 secs / 60 secs / 90 secs / 120 secs
Loop Recording
Overwrite old video files once storage has been depleted.
Available options: ON / OFF
Video Stamp
Embed time of the event being recorded and the video label
into the image or video.
Available options: ON / OFF
Watermark
Display the Transcend logo watermark.
Available options: ON / OFF
Image Stabilization
Enable/Disable the image stabilization function.
Available options: ON / OFF (For DPB30 only)
Time Format
Select the 24-hour or 12-hour AM/PM time format.
Available options: 24HR / AM/PM
Date Format
Set the date format.
Available options: Y/M/D, M/D/Y, or D/M/Y
Microphone
Turn on/off the microphone during video recording.
Available options: ON / OFF
Light Frequency
Select the appropriate frequency to avoid A/C interference.
Available options: 50Hz / 60Hz
Stealth Mode
Turn on/off stealth mode. When stealth mode is enabled, the
light indicators and buzzer are disabled.
Available options: Disable / Enable
Infrared LED
Available options: Manual / Auto
Default Recording Mode
Select the default recording mode.
Available options: Buffering mode / Recording mode
Team Sync
Available options: ON / OFF