Transfluid KR Series User Manual

INSTALLATION
AND MAINTENANCE
BEFORE ASSEMBLlNG AND OPERATING THE FLUID
COUPLlNG, CAREFULL
y
READ ALL THE SAFETY AND
OPERATING INSTRUCTIONS REPORTED IN THIS MANUAL.
ALWAYS FOLLOW ALL THE INSTRUCTIONS AND ASSURE
THAT ALL THE OPERATORS STANDING BY THE
MACHINERY ARE WEARING ALL THE PROTECTIVE
EQUIPMENT NECESSARY FOR THE JOB TYPE AND
APPLlCATION BEING PERFORMED.
DO NOT USE THE MACHINERY IF YOU DO NOT
UNDERSTAND THESE INSTRUCTIONS, AND IMMEDIATELY
REFER TO THE MANUFACTURER OR THE CUSTOMER
SERVICE DESK FOR ASSISTANCE.
THE COUPLlNG MUST BE PROTECTED BY A CONVENIENT
COVER GUARD TO AVOID PERSONAL INJURY TO PEOPLE.
fI,XIAL AND RADIAL VENTILATION OPENINGS SHOULD BE
INCORPORATED IN THE GUARD HEAT EXCHANGE.
IF THE COUPLlNG IS FITTED WITH FUSIBLE PLUGS, THE
SAID OPENINGS SHOULD NOT BE DIRECTED TOWARDS
OPERATORS AND ANY HOT OR ELECTRICAL
INSTALLATION.
FLUID COUPLINGS
...KR... , ...KSD, EK
~
trasmissioni inilustrialí

Transfluid KR Series Specifications

General

Brand	Transfluid
Model	KR Series
Category	Industrial Equipment
Language	English

Summary

General Information and Safety

General Safety and Operating Instructions

Read all safety and operating instructions carefully before assembly and operation.

Installation Procedures

KR, KSD, KRD Series Installation

Instructions for installing KR, KSD, and KRD model fluid couplings.

Installation without Taper Bush

Procedure for fitting the coupling onto the motor shaft without a taper bush.

Installation with Taper Bush

Procedure for fitting the coupling onto the motor shaft using a taper bush.

Lubrication and Surface Preparation

Guidelines for lubricating connecting surfaces for correct assembly.

Fixing Torques and Alignment

Ensuring correct assembly by adhering to fixing screw torques and alignment.

Fluid Coupling Filling

KR, KSD, EK Series Filling

Instructions and oil quantities for filling KR, KSD, and EK series fluid couplings.

CKR, CKSD Series Filling

Filling procedure and oil quantities for CKR and CKSD series fluid couplings.

Recommended Oil Types and Fills

Details on recommended oil types and specific fill quantities for various models.

Operation and Maintenance

Normal Operation and Temperature Limits

Guidance on normal operation, temperature limits, and initial checks.

Troubleshooting High Temperature

Identifies causes and remedies for high temperature issues in fluid couplings.

Disassembly Procedure

Step-by-step instructions for safely disassembling the fluid coupling.

Accessories

Switching Pin

Installation and electrical connection of the switching pin safety device.

Electrical Schemes

Diagrams illustrating electrical connections for alarm and motor stop.

Electronic Overload Controller

Controller Functionality

Detects output speed and monitors load torque for overload protection.

Controller Connections and Settings

Guidance on electrical connections, settings, and parameters for the controller.

Spare Parts and Component Replacement

Recommended Spare Parts

List of recommended spare parts and their corresponding code numbers.

O-Rings and Bearings Replacement

Detailed procedure for replacing O-rings and bearings in the coupling.