Transition Networks SGFEB1014-120 - User Manual

User’s Guide
SGFEB10xx-12x Slide-in-Module Media
Converter
• Copper to Fiber
• 10/100/1000Base-TX to 1000Base-SX/LX
Transition Networks SGFEB10xx-12x series media
converters connect 10Base-TX, 100Base-T, or 1000Base-
T twisted-pair copper cable to 1000Base-SX or
1000Base-LX fiber cable.
The SGFEB10xx-12x has one copper port and one fiber-
optic port. The distances listed are the typical maximum
cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
Installation . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . .8
Cable Specifications . . . . . . . .11
Technical Specifications . . . . .13
Troubleshooting . . . . . . . . . . .14
Contact Us . . . . . . . . . . . . . . .15
Compliance Information . . . . .16
SGFEB10xx-12x
Part Number Port 1 - Copper
10/100/1000-Base-TX
Port 2 - Duplex Fiber-Optic
SGFEB1013-120
RJ-45
100 m (328 ft)
SC, 1000Base-SX, 850 nm multimode
220/550m (720/1,805 ft)
SGFEB1014-120
RJ-45
100 m (328 ft)
SC, 1000Base-LX, 1310 nm single mode
10 km (6.2 miles)
SGFEB1015-120
RJ-45
100 m (328 ft)
SC, 1000Base-LX, 1310 nm single mode
25 km (15.5 miles)
SGFEB1017-120
RJ-45
100 m (328 ft)
SC, 1000Base-LX, 1550 nm single mode
65 km (40.4 miles)
SGFEB1024-120*
RJ-45
100 m (328 ft)
SC, 1000Base-LX, 1300 nm extended
multimode, 2 km (1.2 miles)
SGFEB1035-120
RJ-45
100 m (328 ft)
SC, 1000Base-LX, 1550 nm single mode
120 km (77.5 miles)
SGFEB1040-120
RJ-45
100 m (328 ft)
1000Base-X SFP slot (empty)
*The SGFEB1024 extends 1000Base-LX beyond 220 meters. Transition Networks
cannot guarantee a full 2-km distance on every installation since the distance is largely
dependent on the quality of the fiber, cable installation and splicing.

Transition Networks SGFEB1014-120 Specifications

General

Product Type	Media Converter
Model	SGFEB1014-120
Form Factor	Standalone
Ports	1 x 10/100/1000Base-T
Connector Type	RJ-45, SC
Data Transfer Rate	10/100/1000 Mbps
Fiber Type	Single-mode or Multi-mode
Wavelength	850nm (Multi-mode), 1310nm (Single-mode)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)
Distance	Up to 550m (Multi-mode), Up to 10km (Single-mode)

Summary

Installation

Six-position switch

Configures converter settings like Auto-Negotiation, speed, and duplex modes.

Optional accessories

Lists available mounting and power supply options for the media converter.

AutoCross jumper

Enables automatic detection and configuration of straight-through or crossover cables.

Connection power

Details the procedure for connecting the AC power adapter to the media converter.

Port Locations

Illustrates the physical locations of the RJ-45 and fiber optic ports on the converter.

Installing the RJ-45 copper cable

Instructions for connecting the twisted-pair copper cable to the RJ-45 port.

Installing the fiber cable

Instructions for connecting the fiber optic cable to the converter's fiber port.

Operation

Status LEDs

Explains the meaning and function of the power, link activity, and copper status LEDs.

Auto-Negotiation

Automatically configures the converter's speed and duplex mode for optimal link operation.

Link Pass-Through

Passes link loss signals to the far-end device to prevent data loss.

Full-Duplex Network

Discusses network length determination in full-duplex environments.

Cable Specifications

Fiber Cable Specifications

Details transmitter power, receiver sensitivity, and link budget for various fiber optic types.

Copper Cable Specifications

Specifies requirements for copper cable, including gauge, attenuation, and distance.

Troubleshooting

Contact Us

Compliance Information