12
SGFEB10xx-12x
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Cable Specification—continued
Fiber cable—continued
SGFEB1029-124 1510 TX/1590 RX nm single mode
Fiber Optic Transmitter Power: min: -2.0 dBm max: +3.0 dBm
Fiber Optic Receiver Sensitivity: min: -26.0 dBm max: -3.0 dBm
Link Budget: 24.0 dB
SGFEB1029-125 1590 TX/1510 RX nm single mode
Fiber Optic Transmitter Power: min: -2.0 dBm max: +3.0 dBm
Fiber Optic Receiver Sensitivity: min: -24.0 dBm max: -3.0 dBm
Link Budget: 24.0 dB
SGFEB1035-120 1550 nm single mode
Fiber-optic Transmitter Power: min: 0.0 dBm max: +5.0 dBm
Fiber-optic Receiver Sensitivity: min: -27.0 dBm max: -3.0 dBm
Link Budget: 27.0 dB
The fiber optic transmitters on this device meet Class I Laser safety
requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10
and 21CFR1040.11.
Copper cable
Category 5 (minimum requirement)
Gauge: 24 to 22 AWG
Attenuation: 22.0 dB /100 m @ 100 MHz
Maximum Cable Distance: 100 meters
• Straight-through OR crossover twisted-pair cable may be used.
• Shielded (STP) OR unshielded (UTP) twisted-pair cable may be used.
• All pin pairs (1&2, 3&6, 4&5, 7&8) are active pins in a Gigabit Ethernet network.
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
• Do not use flat or silver satin wire.
Straight-Through Cable Crossover Cable
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
Twisted Pair #1
13
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.
SGFEB10xx-12x
Technical Specifications
For use with Transition Networks Model SGFEB10xx-12x.
Standards: IEEE 802.3, IEEE 802.3ab,IEEE 802.3u,
IEEE 802.3z
Dimensions: 3.3 x 1 x 4.75 in (83.8 x 25.4 x 120.65 mm)
Weight: 2oz (0.9grams)
Power: External AC/DC 12V DC, 1.25 A
Power Consumption: 4.8 watts
Data Rate (copper): 10, 100, 1000 Mb/s
Data Rate (fiber): 1000 Mb/s (operates in full-duplex only)
Unicast MAC address: 8K bytes
Maximum packet size: 1628 bytes tagged (IEEE 802.3ac)
1632 bytes untagged
MTBF: 48,988 hours
(MIL217F2V5.0) (MIL-HDBK-217F)
122,983 hours (Bellcore7 V5.0)
Environment: Tmra*: 0°C to 50°C (32°F to 122°F)
Storage Temp: -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
Altitude: 0 to 10,000 feet
Warranty: Lifetime
* Manufacturer’s rated ambient temperature: Tmra range for the SGFEB10xx-12x
depends on the Transition Networks PointSystem™ chassis in which this slide-in-
module will be installed.
The information in this user’s guide is subject to change. For the most up-to-date
information, see the user’s guide on-line at: www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter
J applicable at the date of manufacture.
CAUTION:
Visible and invisible laser radiation when open. Do not stare into the beam
or view directly with optical instruments.
CAUTION:
Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To Next Page
Loading...
