11
Dynamic Diagnostic System (DDS)
Error code and service icons will appear on the display
when malfunctions are detected. Please check the
following error code numbers and descriptions and contact
your dealer for more information.
Error Code Description
1
The motor hall sensor is not functioning. Signal: Vibrations, noise, no support
2
Broken circuit on the TMM4 sensor. Signal: No support
3
Short circuit on the TMM4 sensor. Signal: No support
4
The RPM sensor is not functioning. Signal: No support, short or uneven support
5
The motor speed sensor is not functioning. Signal: The display doesn’t show the
current speed, no support
6
The „Cut-off“ brake sensor is without function
Flashing battery
icon
Battery doesn´t show capacity. Signal: Disconnection of communication between
battery and system
* Please contact our TranzX PST Service Center at service@tranzxpst.com or +49-6032-92671-50 if other
malfunctions should occur.
Image 1
Img. 18
To Next Page
Loading...