If you step on the footswitch and hold it down, and then a hit a pad, the trapKAT jumps to that kit. You
may recall that the trapKAT's pads numbered from 1-24 coincide with the 24 Kits that are available.
This allows for instant access jumping from any kit to any kit. Just step on the Kit Select Footswitch
and type a pad.
Finally, you can set a pad to “Advance” to the next Kit or go “Backwards” to the last adjacent Kit.
To do this, set the MIDI note number to “Advance” or “Backwards”. These are the special note
numbers that can be found past MIDI note #127. When using this function, these special MIDI notes
must be programmed in every Kit. These are Kit parameters.
42
To Next Page
Loading...