Do you have a question about the Traxxas Slash 4x4 68086 and is the answer not in the manual?
Scale | 1/10 |
---|---|
Drive Type | 4WD |
Motor Type | Brushless |
Battery Type | 7-cell NiMH or 2S-3S LiPo |
Chassis Structure/Material | Composite |
Drive System | Shaft-Driven 4WD |
Radio System | TQi™ 2.4GHz Radio System |
Motor Size | 550 |
Suspension | Independent |
Tire Type | All-terrain |
Body Type | Short Course Truck |
Body Material | Polycarbonate |
Chassis Material | Composite |
Top Speed | 60+ mph |
Front Track | 11.654 inches (296 mm) |
Rear Track | 11.654 inches (296 mm) |
Tire Width (front) | 1.7 inches (43mm) |
Tire Width (rear) | 1.7 inches (43mm) |
Wheel Diameter | 2.2 inches (56mm) Outer / 3.0 inches (76mm) Inner |
Motor (electric) | 550 |
Differential Type | Sealed, oil-filled |
Gear Pitch | 32 |
Steering | Bellcrank |
Charger | Not included |
Shock Type | Oil-filled |
Wheel Size | 2.2 inches (56mm) Outer / 3.0 inches (76mm) Inner |
Get help and find support options for your Traxxas model.
Follow these steps to get your model up and running quickly.
Register your product online within 10 days of purchase for better service.
Regulatory information regarding digital device operation and radio frequency.
Icons used in the manual to highlight important safety and usage tips.
Contact Traxxas for questions about your model or its operation.
Operate model sensibly and with care to ensure safe and fun operation.
Follow precautions to prevent damage to the speed control and other components.
Critical safety information for handling Lithium Polymer batteries.
Guidelines for safe charging and handling of LiPo and other battery types.
Metric tools included with your model for assembly and maintenance.
Useful items for an R/C toolbox for model operation and maintenance.
Essential items needed to operate and maintain your model.
Diagram identifying key parts of the Slash 4x4 model.
A step-by-step guide to get your model running for the first time.
Definitions of terms related to the TQi radio and Velineon power system.
Identification of the TQi transmitter and receiver components and functions.
Guide on how to install AA batteries into the TQi transmitter.
Instructions for charging the included NiMH battery pack using the provided charger.
Overview of transmitter controls and basic adjustments like throttle and steering trim.
Procedure to ensure proper radio system operation at a distance.
Adjusting steering response using the Multi-Function knob for better control.
How to verify and adjust Low-Voltage Detection for LiPo or NiMH batteries.
Steps to calibrate the ESC with the transmitter for proper operation.
Choosing between Sport, Race, and Training modes for different driving styles.
Understanding the LED indicators for various ESC states and protections.
Important safety and operational tips to keep in mind while driving.
Strategies to maximize battery life and driving duration.
Guidelines and precautions for operating the model in wet environments.
How to maintain the receiver box's watertight seal after disassembly.
How to set gear mesh correctly to prevent spur gear damage.
Setting camber and toe-in angles for optimal handling and stability.
Adjusting shock oil viscosity and spring preload for desired damping.
How to adjust the slipper clutch to prevent tire spin and protect the drivetrain.
Routine inspections for damage, wear, and proper component function.
How to check and replace worn slipper clutch friction material.
Guidelines for proper storage of the model and batteries.
Modifying camber link attachment points to alter suspension compression response.
Adjusting roll center to influence vehicle handling and traction.
Recommended pinion and spur gear combinations for different performance levels.
Adjusting differential oil viscosity for varied traction conditions.
Adjusting throttle/steering response using the Multi-Function knob.
Setting servo travel limits to prevent binding and optimize throw.
Feature for managing multiple models and transmitter settings.
Understanding the meaning of various LED indicators on the transmitter and receiver.
Guide to navigating the TQi transmitter's programming menu and functions.
Using the app for intuitive tuning with visual sliders and real-time data.
Displaying speed, RPM, temperature, and battery voltage with sensors.
How Traxxas Link Model Memory simplifies organizing and switching between vehicles.