Need help?Do you have a question about the Traxxas Slash VXL and is the answer not in the manual?
General| Battery capacity | 1200 mAh |
|---|---|
| Battery technology | Nickel-Metal Hydride (NiMH) |
Weight and Dimensions| Width | 185 mm |
|---|---|
| Weight | 1000 g |
Information on contacting Traxxas for support and options.
Overview of procedures to get the model running quickly.
Instructions for registering the product online.
Explanation of icons used in the manual for warnings and hints.
Contact information for Traxxas technical support and services.
General safety guidelines for operating the model responsibly.
Precautions for the electronic speed control (ESC).
Information and warnings regarding Lithium Polymer battery use.
Specific safety guidelines for charging and handling batteries.
Identification of the VXL-3s electronic speed control unit.
Identification of the Velineon 3500 brushless motor.
Location and identification of the battery compartment.
Identification of the steering servo and its linkage.
List of tools and equipment provided with the model.
List of additional equipment necessary for operation.
List of suggested tools and accessories for R/C hobbyists.
Review essential safety guidelines before operating the model.
Instructions for charging batteries and installing them in the model and transmitter.
Procedures for turning on the radio system and checking servo operation.
Guidance on driving the model and making basic adjustments.
Introduction to TQi radio and Velineon power system features.
Definitions of essential radio and power system terms like ESC, motor, LiPo.
Guidance on applying decorative decals to the model.
Important safety tips for radio system operation and antenna placement.
Identification of transmitter controls and receiver connections.
Visual guides for connecting the ESC, motor, battery, and receiver.
Guidance on selecting and installing batteries for the transmitter.
Instructions for charging NiMH and LiPo battery packs.
Instructions for installing battery packs and using different configurations.
Recommendations for choosing batteries for optimal performance.
Overview of transmitter controls, rules, and fail-safe system.
Instructions for adjusting throttle neutral, steering trim, and multi-function knob.
Steps for using the radio system and checking its functionality.
Procedures for range testing and binding the transmitter and receiver.
How to adjust steering sensitivity using the multi-function knob.
Procedure for installing and positioning the receiver antenna for optimal range.
How to verify, activate, and disable Low-Voltage Detection for battery types.
Procedure for resetting transmitter settings and calibrating the ESC.
Instructions for operating the speed control and testing its functions.
How to select and switch between ESC profiles (Sport, Race, Training).
Understanding ESC LED codes and protection features.
Tips and factors affecting battery run time for extended performance.
Precautions and guidelines for driving the model in wet environments.
Important precautions and preparation steps for wet weather operation.
Procedures for cleaning and maintaining the model after wet operation.
Procedures for maintaining the receiver box's watertight seal.
Steps for removing and installing the receiver unit.
Adjusting toe-in, camber, and shock settings for optimal handling.
How to adjust shock mounting positions for different terrain.
Procedure for adjusting the slipper clutch to prevent tire spin.
Guidance on choosing motors and gear ratios for optimal performance.
Setting up motor specs, gear mesh, and centering the servo.
Details on advanced setup for VXL-3s ESC with brushless motors.
Tips for monitoring component temperatures and using cooling solutions.
Critical warnings and advice for advanced LiPo battery users.
Routine checks for damage, wear, and loose components.
Maintenance for slipper clutch, steering, motor, shocks, suspension, and driveline.
Instructions on proper procedures for storing the model.
Adjusting throttle/steering sensitivity, dual-rate, braking, and trim.
Setting end points, sub-trim, and locking settings.
Managing models and restoring transmitter factory defaults.
Information on failsafe function and managing models with Model Lock.
Decoding transmitter and receiver LED indicators for status and errors.
Introduction to navigating the TQi transmitter's menu and functions.
Procedure to reset transmitter settings to factory default.
Detailed guide to setting various transmitter functions via the menu tree.
Using Traxxas Docking Base and Link app for advanced tuning.
Overview of app features including telemetry, interface, and model management.
To Next Page