K-Series Scale Operation Manual
Rev 2, 12_16_2015 14
Placement of Scale
The location in which the scale is placed is very important in order for the scale to
work to its full potential. Certain conditions can affect the capabilities of the scale,
conditions like: the presence of air flow, variations in temperature, and direct sunlight.
Please follow the recommendations given below in choosing a location to place your
scale.
Place the scale on a solid, firm and preferably vibration-proof, horizontal base
Make sure that the weighing machine cannot be shaken or knocked over
Protect from direct solar radiation
Avoid drafts and excessive temperature fluctuations
Avoid placing the scale near or on any magnetic surfaces.
Mains Voltage Safety
The following Safety recommendations should observed when connecting the balance
to the mains voltage socket.
The Scale should only be connected to the mains voltage socket with the power adapter
supplied. Check before connecting the power adapter to the mains socket, that the
operating voltage stated on the power adapter complies with the local mains voltage.
If the operating voltage is not the same as the mains voltage, the power adapter must
not be connected to the mains socket and contact customer service.
To Next Page
Loading...
