Trek CHECKPOINT SL - Brake;shift routing - mechanical

2022 Checkpoint SL/SLR
2
Brake/shift routing — mechanical
1
2
3
4
5
2-3Nm
6.5Nm
max
6
7
8
9




NOTE: Tighten the front derailleur
bolt (5) to the manufacturer’s
specications.
1
Rear derailleur hanger — W524188
2
Rear derailleur hanger bolts — W524884
3
Housing grommets — W330578
4
Front derailleur washer — W531901
5
Front derailleur bolt — W543903
6
Front derailleur cable
7
Rear derailleur cable
8
Front brake hose
9
Rear brake hose
10
Dropper post cable
Route the brake hoses
1. Connect the calipers to the brake hoses.
2. Route the rear brake hose through the grommet (3).
Route both brake hoses as shown.
3. Attach the calipers to the chainstay and fork. Do not
fully torque the mounting bolts until the calipers are
aligned correctly.