Need help?Do you have a question about the Trek 2021 E-CALIBER and is the answer not in the manual?
General| Wheel Size | 29" |
|---|---|
| Model Year | 2021 |
| Category | Bicycle |
| Type | Electric Mountain Bike |
| Suspension | Full Suspension |
| Frame Features | internal cable routing, Boost148 |
| Fork | RockShox Recon RL, 120mm travel |
| Rotors | 180mm |
| Wheels | Bontrager Line Comp 30 |
| Tires | Bontrager XR3 Team Issue, 29x2.40" |
| Stem | Bontrager Elite |
| Saddle | Bontrager Arvada |
| Seatpost | 31.6mm |
| Handlebar | Bontrager alloy, 31.8mm, 15mm rise |
For detailed dropper remote instructions, please refer to the Drop Lock Remote manual at trekbikes.com/manuals.
See the IsoStrut remote lockout cable section on page 9.
Use a shock pump to check the air pressure in the shock. Make a note of the current air pressure so you can re-inflate the shock after changing the air spacer.
Remove the two bolts and washers at the front of the shock.
IsoStrut seal and bushing press tool set. Available as part number 593490.
Slide hammer, 30-36 Expanding collet, IsoStrut seal and bushing press tool set.
Remove the IsoStrut hardware. See IsoStrut section on page 10.
Refer to the 2021 Domane+ LT Fazua system manual.
Specifies the distance from the center of the chainring to the center of the frame.
Details the available chainring sizes and their corresponding chainline measurements.
Lists the minimum and maximum rear brake rotor sizes for the bicycle.
Indicates the steering angle limitation of the Knock Block system.
Provides seat post installation details and maximum insertion depths by frame size.
Details recommended sag (20-25%) and dimensions for the IsoStrut suspension.
Provides details on recommended sag (18mm/15%), travel (120mm), and maximum fork length (531mm).
To Next Page