Trek 2021 E-CALIBER - Air Volume Spacer; Note the Current Air Pressure; Release the Shock from the Carriage

2021 E-Caliber Service Manual
11
Air volume spacer
Item Description Part Number
1 Foxairvolumespacerkit 595583
Tools
• BSA30 Open-ended bottom bracket tool
• Spanner pliers
• Loctite Blue 243 threadlocker or similar
• Parallel jaws pliers
• T25torxdrivewrench
• Torquewrench
• Shock pump
• Spacers
• Soft cloth
• Grease
Note: This procedure should be performed with the
IsoStrutinstalledonthebike.
Note the current air pressure
1. Useashockpumptochecktheairpressureinthe
shock.Makeanoteofthecurrentairpressuresoyou
canre-inatetheshockafterchangingtheairspacer.
2. Graduallybleedtheairfromtheairvalve.
Tip: You do not need to compress the shock because
youwillneedsomeairinthenegativeairspring.
Release the shock from the carriage
1. Remove the two bolts and washers at the front of the
shock.
2. Loosen,butDONOTREMOVEtherearaxle.
3. Turnthelockoutleveranti-clockwisetotheopen/
unlockedposition.