Trellix NS3200 - 6 Install the Manager software; 7 Add the Sensor to the Manager

6 Install the Manager software
Following steps briey explain the Manager installation:
Note
You must have administrator privileges on the target Windows or Linux server to install the Manager
software.
Note
MariaDB is included with the Manager and is installed (embedded) automatically on your target Windows or
Linux server during this process.
a Prepare the system according to the requirements outlined in Trellix Intrusion Prevention System
Installation Guide.
b Close all open applications.
c Go to Trellix Download Server (https://www.trellix.com/en-us/downloads/my-products.html).
d Log on using your Grant Number and registered Email Address.
The Find Products page opens.
e In the Category lter, select Network Security.
f Click on the Manager version required.
The Available Downloads page opens.
g In the Type lter, select Installation.
The Manager installation les available for download are listed.
h Click on the required Manager installation le and the download starts.
i Refer to Trellix Intrusion Prevention System Installation Guide for detailed procedure to install the Manager
application.
7 Add the Sensor to the Manager
The Manager displays the Logon page.
a Log on to the Manager using the default user name (admin) and password (admin123).
b Go to Devices | <Admin Domain Name> | Global | Device Manager.
The Device Manager page is displayed.
8