EasyManua.ls Logo

TREND T32 - Technical Data; Intended Use

TREND T32
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-4-
EN – T32
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
TECHNICAL DATA
Voltage UK & Eire
Europe
V
AC
V
AC
230/115
230
Power Input 230v
115v
W
W
800
800
Frequency Hz 50
Flow rate l/s 20
Max. vaccum mbar 146
Filter surface HEPA cmq 1850
Negative pressure K
PA
14.6
Dust category M
Collection bag
contents
L 15
Container L 20
Noise dB 80
Hose Length
Outside diameter
M
mm
3
39
Dimensions Height x width mm 492 x 375
Weight kg 6.5kg
Vibration m/s
2
<=2.5
L
PA
(emission sound
pressure level)
dB(A) <=70
K
PA
(uncertainty for the
given sound level)
dB(A) 1.5
L
WA
(sound power level) dB(A) 80
K
WA
(uncertainty for the
given sound level)
dB(A) 1.5
Fuses
UK & Eire 230V tools 13 Amperes, in plug
UK & Eire 115V tools 16 Amperes, main
Europe 230V tools 16 Amperes, main
CAUTION:
Read the instructions before using the machine
Definitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please re ad the manual and pay
attention to these symbols.
The following symbols are used throughout this manual:
WARNING:
indicates a potential hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Additional Symbols Used
Wear Personal Protective Equipment (PPE).
Ear, eye and respiratory protection must be worn.
Denotes risk of personal injury, loss of life or
damage to the tool in case or non-observance of the
instructions in this manual.
INTENDED USE
This machine is intended for collection, vacuuming,
conveying and separation of non- flammable dry dusts
and non-flammable liquids and water-air mixtures. This
dust category class M vacuum cleaner is for professional
use and is suited for trades and workshops.
According to IEC/EN 60335-2-69, vacuum of dust
category M may only be used for vacuuming and
extraction of hazardous dusts with an exposition limit
value ≥ 0.1 mg/m3. Use vacuum cleaner only when you
fully understand and can perform all functions without
limitation, or have received appropriate instruction.
This appliance is suitable for commercial use, for
EN - T32

Related product manuals