EN - T8
-8-
EN - T8
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
TECHNICAL DATA
T8
Voltage V AC 230-240 (T8E)
110 (T8EL)
Type 1
Power input W 2200
No load speed min 1 10000
26000
Max Plunge Depth mm 80
Max cutter diameter (Portable Router) mm 50
Max cutter diameter in table mm 65
Collet size (UK & ROI) inch 1/2 + 1/4 sleeve
Collet size (EU) mm 12mm + 8mm sleeve
Weight kg 5.8
Noise values and vibration values (triax vector sum) according
to EN62841 2 17:
L
PA
(emission sound pressure level)
dB(A) 94.1
L
WA
(sound power level)
dB(A) 105.1
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h,hv
= m/s
2
3.8
Uncertainty K =
m/s
2
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN62841 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING: The declared vibration and/or
noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of work
patterns.
WARNING: To reduce the risk of injury, read
the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related
to personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
To Next Page
Loading...
