TRENDnet TE100-MP1UN Quick Installation Guide

3
7. Connect a RJ-45 network cable from a
Switch/Router to the Ethernet port on your
computer and then click OK.
6. Connect a RJ-45 network cable from a
Switch/Router to the LAN port on the Print
Server.
8. Power ON your printer and then click OK.
9. Connect the AC Power Adapter to the Print
Server and then to a power outlet. Then click
OK.
10. Verify the Status LED is on and the Error LED
is off on the Print Server. Then click Yes.

TRENDnet TE100-MP1UN Specifications

General

Brand	TRENDnet
Model	TE100-MP1UN
Category	Print Server
Language	English