ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
5
4. Configure the Access Point
Note: It is recommended that you configure the Access Point from a wired computer.
Before the Access Point can be configured, a Static IP address must be assigned to
your computer's network adapter in the subnet of 192.168.10.X. Since the Access
Point's default IP address is 192.168.10.100, make sure no other network devices are
assigned an IP address of 192.168.10.100. (Refer to Troubleshooting section on how to
configure TCP/IP settings on your PC.)
1. Open your web browser, type
http://192.168.10.100 in the Address bar, and
then press Enter.
2. Enter the User name and Password, and then
click OK. By default:
User Name: admin
Password: admin
3. Click Wizard.
To Next Page
Loading...
Need help?
General
