TRENDnet TEW-690AP Quick Installation Guide

3
6. Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.
7. Connect the Power Adapter to the Access Point
and then to a power outlet. Verify that the
power switch is set to the on position
(EU version only). Then click Next.
8. Select the TEW-690AP from the list and then
click Configure.
9. By default, there is no password. Click Login
10. Select Dynamic IP Address Configuration
and then click Configure.

TRENDnet TEW-690AP Specifications

General

Brand	TRENDnet
Model	TEW-690AP
Category	Wireless Access Point
Language	English