TRENDnet TEW-740APBO2K Quick Installation Guide

4
2. Remove the tab on the far left by gently bending it back and forth until the tab is removed.
This will create the opening for a RJ-45 network cable to be routed through.
Tab
3. Using a network cable, connect one end of the cable to the LAN (PoE) port and push the cable
into the cable guide on the far left, then through the opening that was created in the previous
step.
Cable Guide

TRENDnet TEW-740APBO2K Specifications

General

Brand	TRENDnet
Model	TEW-740APBO2K
Category	Wireless Access Point
Language	English