TRENDnet TEW-740APBO2K Quick Installation Guide

ENGLISHFRANÇAISDEUTSCH
ESPAÑOLРORTUGUÊS
3
1. Remove the cover of the access point by pushing and holding the tab in the vertical direction
upward (based on the access point orientation below) and pulling the cover in the two
locations noted below away from the access point.
Pull and hold tab
Aside from the preconfigured WDS bridge settings, the TEW-740APBO access points will also be
configured with the following default settings:
Verify connectivity between the two access points before mounting.
TEW-740APBO #1
Mode: WDS Mode
IP Address: 192.168.10.50
Netmask (Subnet Mask): 255.255.255.0
IP Gateway (Default Gateway): 192.168.10.1
Primary DNS: 192.168.10.1
TEW-740APBO #2
Mode: WDS Mode
IP Address: 192.168.10.51
Netmask (Subnet Mask): 255.255.255.0
IP Gateway (Default Gateway): 192.168.10.1
Primary DNS: 192.168.10.1

TRENDnet TEW-740APBO2K Specifications

General

Brand	TRENDnet
Model	TEW-740APBO2K
Category	Wireless Access Point
Language	English