TRENDnet TEW-740APBO2K Quick Installation Guide

2
2. Hardware Setup and Configuration
Note: By default, the TEW-740APBO access points are preconfigured to establish a point-to-
point WDS bridge between each other using a unique predefined AES encryption key. For
convenience, a unique predefined admin password has already been assigned to both access
points. You can find the preconfigured access point settings on the wireless sticker or on the
device label beneath the cover where the Ethernet ports and LEDs are located. No additional
configuration is required.
WIFI MAC: XXXXXXXXXXXXXXXXX
ETH LAN1 MAC: XXXXXXXXXXXXXXXXX
Model: TEW-740APBO / A
S/N: XXXXXXXXXXXXXXX
H/W: V2.0R FW: 2.0K
Made in XXXXXXX
IP Address: 192.168.10.50
Subnet Mask: 255.255.255.0
User Name: admin
Passwork: XXXXXXXX
Preset
Wireless Settings
Mode/WiFi Channel
WDS Bridge / CH 1
AES Encryption Key
Management Login
http://192.168.10.51
username: admin
password: XXXXXXXX
740XXXXXXXX
Unit 1 Unit 2
Preset
Wireless Settings
Mode/WiFi Channel
WDS Bridge / CH 1
AES Encryption Key
Management Login
http://192.168.10.50
username: admin
password: XXXXXXXX
740XXXXXXXX

TRENDnet TEW-740APBO2K Specifications

General

Brand	TRENDnet
Model	TEW-740APBO2K
Category	Wireless Access Point
Language	English