WPS connection using a PIN
1. Click on the wireless adapter icon in the top menu bar.
2. Scroll to the bottom of the available wireless networks list and click the arrow at the
bottom.
3, After the additional menu opens, click on WPS.
4. In the WPS window, note the randomly generated WPS PIN.
5. Log into your router or access point to enter in the wireless adapter PIN and activate
WPS.
Note: You may need to refer to your device documentation for WPS operation and where
to enter the client PIN in your router’s configuration page. In TRENDnet routers, typically,
the router configuration section to enter the PIN is under Advanced > Wireless 2.4GHz or
5GHz > WPS, example below.
6. Return back to the computer with the WPS window open and click PIN.
To Next Page
Loading...
Need help?
General