Need help?Do you have a question about the TRENDnet TEW-840APBO and is the answer not in the manual?
Lists all items included in the TEW-840APBO package, such as the access point, PoE injector, and mounting hardware.
Highlights key capabilities like 14 dBi antenna, IP56 rating, MU-MIMO technology, and dual-unit kit convenience.
Explains the configuration and requirements for using a single TEW-840APBO unit to create a WDS link.
Details the preconfigured settings and convenience of the TEW-840APBO2K kit for point-to-point bridging.
Instructions on how to find and record the WiFi SSID, WPA2 Key, and MAC address for each access point.
Describes the function of the access point as a main, relay, or remote base station for wireless clients.
Details the mode for broadcasting a WiFi network bridged to another WDS AP to expand network coverage.
Describes the device acting as a client to a wireless connection for WDS link integrity and MAC transparency.
Allows configuration of the access point's IPv4, IPv6, and Spanning Tree Protocol settings.
Enables configuration of all wireless settings, including SSID, security, and channel access mode.
Allows configuration of administrator username, current password, and new password.
Provides information on checking for, downloading, and upgrading the device's firmware.
Lists all items included in the TEW-840APBO package, such as the access point, PoE injector, and mounting hardware.
Highlights key capabilities like 14 dBi antenna, IP56 rating, MU-MIMO technology, and dual-unit kit convenience.
Explains the configuration and requirements for using a single TEW-840APBO unit to create a WDS link.
Details the preconfigured settings and convenience of the TEW-840APBO2K kit for point-to-point bridging.
Instructions on how to find and record the WiFi SSID, WPA2 Key, and MAC address for each access point.
Describes the function of the access point as a main, relay, or remote base station for wireless clients.
Details the mode for broadcasting a WiFi network bridged to another WDS AP to expand network coverage.
Describes the device acting as a client to a wireless connection for WDS link integrity and MAC transparency.
Allows configuration of the access point's IPv4, IPv6, and Spanning Tree Protocol settings.
Enables configuration of all wireless settings, including SSID, security, and channel access mode.
Allows configuration of administrator username, current password, and new password.
Provides information on checking for, downloading, and upgrading the device's firmware.
General| 2.4 GHz | No |
|---|---|
| Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, OFDM, QPSK |
| Frequency band | 5.150 – 5.250, 5.725 – 5.850 GHz |
| Channels quantity | 165 channels |
| Transmitting power | 23 dBmW |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Receiver sensitivity | 802.11a: -71 dBm (typical) @ 54Mbps 802.11n (5GHz): -66 dBm (typical) @ 300Mbps 802.11ac: -55 dBm (typical) @ 867Mbps |
| Maximum data transfer rate | 867 Mbit/s |
| Wi-Fi Multimedia (WMM)/(WME) | Yes |
| Ethernet LAN (RJ-45) ports | 2 |
| Placement | - |
| Certification | FCC |
| Product color | Black |
| International Protection (IP) code | IP56 |
| Security algorithms | AES, SSID, WDS, WEP, WPA2-Enterprise, WPA2-PSK |
| Antenna features | Integrated antenna |
| Antenna gain level (max) | 14 dBi |
| Input current | 0.4 A |
| Output current | 0.6 A |
| Output voltage | 24 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 9.5 W |
| Operating temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Number of products included | 1 pc(s) |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 185 mm |
| Height | 35 mm |
| Weight | 268 g |
To Next Page
