2
4. Open your web browser and enter “http://tew-815dap”.
3. Assign a Static IP address to your computer's network adapter in the subnet of 192.168.10.x (e.g.
192.168.10.25) and a subnet mask of 255.255.255.0. Please refer to the Appendix in the User's
Guide for more information.
2. Installation
1. Connect your computer to the TEW-815DAP's LAN port.
2. Connect the power adapter to the access point and then to a power outlet. For EUNL versions,
toggle the power switch to the on position.
Note: You can also access the device using the default IP address (http://192.168.10.100).
5. Select the desired language.
6. Enter the default user name and password. You can find the default username (admin) and
password (admin) on the labels on the side and bottom of the access point.
To Next Page
Loading...
Need help?
General
