Need help?Do you have a question about the TRENDnet TV-IP862IC and is the answer not in the manual?
Instructions for connecting the camera to the network using an Ethernet cable.
Guide for establishing a wireless connection using the Wi-Fi Protected Setup (WPS) method.
Overview of the camera's main interface elements and controls.
Explanation of the icons and functions available in the camera toolbar.
Configures the camera's local network IP address settings.
Manages the administrator account password for security.
Configures wired network parameters like IP address and ports.
Guides through setting up the wireless network connection.
Configures video stream settings like resolution and encoding.
Adjusts image parameters such as brightness, contrast, and color.
Sets up recording triggered by motion detection.
Configures recording to occur at specific scheduled times.
Sets up recording triggered by sound detection.
Configures settings for capturing video clips.
Configures settings for capturing still images.
Allows setting and managing predefined camera positions.
Restores the camera to its original factory settings.
Restarts the camera, useful for applying software changes or resolving issues.
Instructions for updating the camera's firmware.
Displays detailed information about the camera's hardware and software.
Steps to set up Dynamic DNS directly on the camera.
Steps to set up Dynamic DNS through the home router.
Specifications for the camera's Wi-Fi connectivity (802.11b/g/n).
Instructions for connecting the camera to the network using an Ethernet cable.
Guide for establishing a wireless connection using the Wi-Fi Protected Setup (WPS) method.
Overview of the camera's main interface elements and controls.
Explanation of the icons and functions available in the camera toolbar.
Configures the camera's local network IP address settings.
Manages the administrator account password for security.
Configures wired network parameters like IP address and ports.
Guides through setting up the wireless network connection.
Configures video stream settings like resolution and encoding.
Adjusts image parameters such as brightness, contrast, and color.
Sets up recording triggered by motion detection.
Configures recording to occur at specific scheduled times.
Sets up recording triggered by sound detection.
Configures settings for capturing video clips.
Configures settings for capturing still images.
Allows setting and managing predefined camera positions.
Restores the camera to its original factory settings.
Restarts the camera, useful for applying software changes or resolving issues.
Instructions for updating the camera's firmware.
Displays detailed information about the camera's hardware and software.
Steps to set up Dynamic DNS directly on the camera.
Steps to set up Dynamic DNS through the home router.
Specifications for the camera's Wi-Fi connectivity (802.11b/g/n).
Lens Specifications| focal length | 4.6 mm |
|---|---|
| focal depth | 20 cm - infinity |
| sensor type | ¼” CMOS sensor |
Viewing Angle| diagonal viewing angle | 58˚ |
|---|---|
| horizontal viewing angle | 49˚ |
| vertical viewing angle | 31˚ |
Pan & Tilt| pan range | 330° |
|---|---|
| tilt range | 115° |
Minimum Illumination| minimum illumination with IR off | 1 lux |
|---|---|
| minimum illumination with IR on | 0 lux |
| IR illumination distance | 7.5 meter |
Video Codecs/Resolution| H.264 resolution | 1280 x 720 up to 30 fps |
|---|---|
| MPEG4 resolution | 1280 x 720 up to 30 fps |
| JPEG resolution | 1280 x 720 up to 5 fps |
Operating Environment| operating temperature | 0 – 40 °C |
|---|---|
| operating temperature (Fahrenheit) | 32 – 104 °F |
| maximum humidity | Max 90% non-condensing |
Power| power input | 100 - 240 V AC, 50 - 60 Hz, 0.5 A |
|---|---|
| power output | 12 V DC 1 A |
| maximum power consumption | 10.5 W |
Dimensions and Weight| camera dimensions | 128 x 159 X 142 mm |
|---|---|
| camera dimensions (inches) | 5.0 x 6.2 x 5.6 in. |
| weight | 340 g |
To Next Page
