Trevi 211 - Seat Cap Installation; Security Labels Installation; SSE Labels; PAPTH Label

SEAT CAP INSTALLATION
14
Put the seat cap on the inside section of the seat and interlock with
the upright. Secure the seat cap with one (1) screw “Z”.
Snap the solar cap on top of the seat cap and interlock it on the bot-
tom.
SECURITY LABELS INSTALLATION
15
SEAT CAP
TOP SEAT
SOLAR
CAP
SEAT CAP
‘’Z’’
SCREW
TOP SEAT
The homeowner is responsible to install all safety labels.
SSE Labels (4) :
The safety labels shall be visible from any potential entry points of
the pool. Also, make sure to install safety labels at all access points
of your yard.
PAPTH Label (1) :
The safety label shall be placed at the entrance of the pool, visible
and never covered.
Important: if you require additional labels, please contact us at
Trevipools.com