Trevi 211 - Filtration System Assembly; Parts List

FILTRATION SYSTEM ASSEMBLY
16
PARTS LIST
17
* SEE DRAWING PARTS NEXT PAGE
Assemble skimmer, inlet, drain, filter, pumps, hoses according to separate
manufacturer’s instructions.
Note: See 'Safety Information" Manual.
NOTE: Please confirm quantities with checklist included in each box.
POOL WALL (finished lenght, inch)
BOLT & NUT FOR 52" (OR 54") WALL
POOL LINER
PLASTIC COUPLER (SOLD SEPARATELY)
TOP SEAT - ROUND SECTION
TOP SEAT- STRAIGHT SECTION
BOTTO
M PLATE
UPRIGHT 52'' or UPRIGHT 54''
TOP PLATE - ROUND SECTION
SEAT CAP
TOP TRACK - ROUND SECTION
TOP TRACK - STRAIGHT SECTION
BUTTRESS ASSEMBLY
BUTTRESS POST
TOP PLATE -
STRAIGHT SECTION
NUT 1/2" (12,7 mm)
WASHER 1/2" (12,7 mm)
TENSION STRAP
1/4" #20 X 5/8" (6,35 mm X 15,88 mm) SCREW & FLANGE NUT
STANDARD SCREW ( SCREW #14 , 1" LENGHT)
ITEMDESCRIPTION
AA
BB
CC
DD
A
B
C
D
E
F
G
J
L
O
P
Q
R
S
U
UU
V
X
Y
BB
Z
SEAT CAP EXTENSION - STRAIGHT SECTION
N
SOLAR CAP
H
BOTTOM BRACE
ANGLE BRACE
BEARING PLATE
BOLT 1/2" X 1" (12.7 mm X 25.4 mm)
PATIO BLOCK
BOTTOM TRACK - ROUND SECTION
TRACK FASTENER
K