15
Insert threaded nozzles, if applicable, in order to be able to
s
crew the valve in the skimmer.
Connect the drain hose to the bottom nozzle. Connect the
m
otor hose to the side nozzle.
The threads on all threaded nozzles must be covered with
t
eflon tape prior to installing in order to prevent water
leaks. Teflon is applied to the threads as follows: little or
none on the first few threads (to facilitate introduction)
a
nd several layers towards the end threads (for better
watertightness).
! %%"!"
14
To Next Page
Loading...
