4. Swap from current channel to the previous one:
Your receiver remembers the previous activated channel:
- By pressing you can switch from the current to the previous channel
- By pressing again switch back to the current channel
Every time you perform a channel change, the title and start/stop time of the current and the
following programme are displayed in the channel change OSD (on screen display).
Thereby the scale of progression below the programme number signals the temporal
progress of the current programme.
If faded out you can display this information again by pressing OK.
EPG – Electronic Programme Guide
Almost all TV and radio broadcasters provide further information on their programme. Your
receiver stores and decodes these data and displays them in the so called Electronic
Programme Guide (EPG).
This programme preview is activated by using the EPG button. The appearing list contains all
programmes of the current channel.
In the headline of the menu channel name, date and time are shown.
By using the buttons the channel can be changed without leaving the EPG-menu.
With or ◄ ► you can select the broadcast you want to be informed about. You can get
more detailed information by pressing OK.
Also you can use the EPG list to program a record timer very easily: Just press the Record
button and activate the record timer in the corresponding menu.
Please use EXIT to leave this on screen dialog.
Settings
The basic functionality of the receiver is defined in the Settings menu.
The derivation of your local time against the GMT (Greenwich Mean time) time needs to be
corrected, otherwise the displayed times may be wrong.
Hint:
At each on screen display the possible user inputs are explained in the help bar at the lower
screen brink.
By pressing ◄ and ► you can change the corresponding settings. When leaving a menu
(EXIT button) you will be asked to store the performed modifications (Yes) or to keep the
To Next Page
Loading...