Initial installation
After reading the safety instructions (see chapter “safety instructions)” and finishing the actions
explained in chapter “connecting the receiver” please use the supplied power cord for
connecting the apparatus to the power supply. When running the receiver for the first time the
“welcome menu” of the installation guide is displayed at the TV screen.
It helps you installing the most important settings.
Language of the menu
In the first step of the installation guide please select your
language
by using or . Confirm your choice by OK.
Country
In the second step please select your country.
Therefore press and then OK. If you want to get back to
the language selection, you have to use the EXIT button.
NOTE: The choice of the country affects the the channel list
sorting.
In the next step please select the parameters of your local
network ( use or ).
If you are not sure which type of modulation you have to use,
please select QAM-ALL for an automatic channel search.
Only the symbolrate (6.111MS, 6.875MS or 6.900MS) must be
selected.
Confirm with OK.
To Next Page
Loading...
