Mode d’emploi / User manual TOM 011
16 / 18
Mesureur Puissance Optique
Optical Power Meter
TOM 011 – Référence / Part Number: 307967
4. Troubleshooting
Faint display on the LCD
screen
Charge or replace the battery.
the
2. Re-put the battery
Optical power is not
stable after the unit
turned off.
Use it after 15 minutes warm-up.
5. Notice
9.1 Ensure the connector is clean when test.
9.2 Do not plug in the power supply when install the battery.
9.3 Do not look into the laser beam when test.
9.4 Please charge the battery before using
and do not charge it in the unit.
9.5 Please cover the dust-proof cap when it is not in operation.