Tribest slowstar SW-2020

Questions and Answers

H
Hector AdamsAug 12, 2025
Why does my Tribest slowstar SW-2020 Juicer Slowstar motor stop during use?
- A
  andersonaprilAug 12, 2025
  The motor may stop during use if too many juicing ingredients are inserted at the same time, or if hard seeds break down the juicing screen and Duoblade Auger. To resolve this: * Turn the switch to “OFF” and then to “Reverse” to unclog materials, repeating this three times. Then turn the switch to “ON” to push the materials down. * If this doesn't work, turn the switch to “OFF”, place the main body in a cool area, and let the Slowstar rest for an hour to cool the motor down before trying again. * Remove all hard seeds from ingredients before juicing.
H
Holly MosesAug 16, 2025
What to do if my Tribest slowstar SW-2020 Slowstar is making a lot of sounds?
- S
  smithvalerieAug 16, 2025
  If your Slowstar is making a lot of sounds, try the following: * Turn the switch to “OFF” and check if all parts are assembled properly. * Ensure the Slowstar is operating on an even surface. * Verify that juicing materials are cut to the right sizes. Note that some squeaky friction noise during use is normal.
N
nvasquezAug 20, 2025
What to do if the Tribest slowstar SW-2020 Juicer Slowstar does not work?
- J
  Jorge JohnsonAug 20, 2025
  If your Slowstar juicer isn't working, make sure the power cord is properly plugged in and that all parts are assembled correctly.
J
joseph99Aug 25, 2025
Why is the amount of juice too little from my Tribest slowstar SW-2020 Juicer?
- J
  Joseph DiazAug 25, 2025
  The amount of juice extracted can vary based on the freshness of the food. To extract more juice, refrigerate ingredients, then soak them for about 10 minutes in clean water before juicing. Also, check if the Pressure Plug is assembled properly.
K
kelly88Aug 27, 2025
What to do if juice is spilling out of my Tribest Juicer Slowstar?
- S
  Spencer JonesAug 27, 2025
  If juice is spilling out of your Slowstar, check if the pressure plug is assembled properly.
A
Ariel WilliamsAug 31, 2025
Why does the Tribest Juicer Slowstar juice container shake?
- P
  Pamela WongAug 31, 2025
  It is completely normal if the juice container shakes a little bit during operation.
A
andrew74Sep 4, 2025
What to do if the Feeding Chute Assembly of my Tribest slowstar SW-2020 does not disassemble easily?
- S
  Scott MannSep 4, 2025
  If the Feeding Chute Assembly does not disassemble easily, grab the Feeding Chute firmly and rotate it counter-clockwise with force.
J
Jason CooperSep 8, 2025
Why does the Duoblade Auger seem to be grinding in my Tribest slowstar SW-2020 Slowstar?
- T
  Travis RobertsSep 8, 2025
  Operating the Slowstar without feeding any food may cause the Duoblade™ Auger to grind.

Summary

Important Safeguards

Warnings

Precautions

Features

Slow Juicing and Auger Design

Combines slow juicing at 47 RPM with a Duoblade Auger for efficient processing.

Mincing and Power Features

Highlights the mincer attachment and powerful motor with high torque for versatile use.

Safety and Durability

Covers the additional safety switch and the use of strong, BPA-Free HD Ultem materials.

Parts

How to Assemble

How to Use

Operation Troubleshooting

Provides steps to take if the juicer stops working during operation.

Using the Mincer Attachment

Instructions for assembly and use of the mincing attachment.

How to Disassemble

How to Clean and Store

Disassembly and Assembly Order

Details the correct sequence for disassembling and assembling parts during cleaning.

Feeding Chute Lid Tip

A tip for addressing issues with the Feeding Chute Lid not opening after operation.

Tips for Silicone Parts

Silicone Blade Handling

Proper methods for disassembling and assembling the silicone blade.

Sealing Ring and Pressure Plug Care

Guidance on cleaning and correctly reassembling the sealing ring and pressure plug.

Troubleshooting

Unit Not Working or Motor Stops

Solutions for when the juicer does not work or the motor stops during use.

Juice Yield and Noise Issues

Addresses problems like low juice output, grinding sounds, or unusual operational noises.

Spillage and Cleaning Problems

Tips for preventing spillage and resolving cleaning-related issues.

Specifications

Tribest slowstar SW-2020 Specifications

General

Motor Power	200 Watts
Juicing Speed	47 RPM
Juice Yield	High
Warranty	10 years
Auger Material	Ultem
Pulp Ejection	Automatic
Type	Masticating Juicer
Material	Plastic
Weight_kg	6.6
Dimensions_cm	46 x 21.6 x 33