What to do if Tribest Juicer leaks juice from the back of the auger housing?
If juice is leaking from the back of the Tribest Juicer's auger housing, the auger housing retaining ring might be loose. Try reassembling it. Also, you may have overloaded the unit, so reduce the amount of food/produce being put in.
What to do if Tribest Juicer auger housing doesn't fit on the base?
If the auger housing does not fit onto the base of your Tribest Juicer, check to see if there are any foreign materials inside.
Instructions for juicing leafy greens, vegetables, and fruits using the juicing screen.
Instructions for making rice cakes, grinding, pasta, or tofu using the homogenizing screen.
General| Dimensions | 15.5 x 6.5 x 11.5 inches |
|---|---|
| Weight | 20 pounds |
| Speed | Low speed (approximately 80 RPM) |
| Motor Power | 150 Watts |
| Pulp Ejection | Automatic |
| Type | Single Auger |
| Material | Plastic and Stainless Steel |
To Next Page
