TrickleStar TS1810 - Sensing Modes; IR + Motion vs. IR-Only; Countdown Timer Logic

Countdown Timer Operation for Multi-Sensing
For the first 15/30/60 minutes - the multi-sensor looks for IR remote activity only.
For the next 15/30/60 minutes - the multi-sensor looks for IR remote activity
and motion.
If no IR remote activity or motion has been detected during the 30/60/120 minute
countdown period, the switched outlets and the items plugged into them turn off,
including the TV.
www.tricklestar.com
AV Advanced Powerstrip+
Sensing Modes
IR-Only Sensing
Countdown Timer Operation for IR-only Sensing
For 60/120 minutes - the multi-sensor looks for IR remote activity.
If no IR remote activity is detected during the 60/120 minute countdown period,
the switched outlets and the items plugged into them turn off, including the TV.
IR + Motion Sensing
surge ground switched
Press any button but the power button on an Infrared (IR)
remote control to supply power to the switched outlets
Turn on your TV and related electronics
A 15/30/60-minute countdown starts. Did you press a button on an IR
remote and did the sensor detect it (as indicated by a red blink)?
ALERTS START. A continuous red/blue LED flashes for 10 minutes, and an
optional buzzer sounds at 10 min and 3 minutes prior to shutdown.
TV and peripherals turn off.
Yes
No
Yes
No
The next 15/30/60 minute countdown timer starts. IR remote
activity or motion detected?
surge ground switched
Press any button but the power button on an IR remote control
to supply power to the switched outlets
Turn on your TV and related electronics
A 60/120-minute countdown starts. Did you press a button on an IR
remote and did the sensor detect it (as indicated by a red blink)?
ALERTS START. A continuous red/blue LED flashes for 10 minutes, and an
optional buzzer sounds at 10 min and 3 minutes prior to shutdown.
TV and peripherals turn off.
Yes
No