Introduction
This manual provides the necessary information for the proper
installation and use of TriMark’s Relay e-PAD Keypad.
The Relay e-PAD Keypad includes:
e-PAD (keypad user interface) - Keypad integrated grab
handle. Clean acrylic rod with mild soap and water only.
Mounting gasket
This device is designed to directly control the power actuation of one
door’s lock or latch. The output of the keypad is internally regulated,
but still requires a 5-Amp or 7.5-Amp fuse protecting the branch of
the circuit dedicated solely to this keypad.
Currently Available as Horizontal Only
1
To Next Page
Loading...