Standard Mode e-PAD Operation and Features
This mode is primarily intended for controlling an actuator that will lock or
unlock a door’s security feature (cam lock, deadbolt, etc.)
The e-PAD is shipped with default Authority and Access Codes. If the
OEM or dealer has not changed default codes, the Authority and Access
Codes are:
Access code:
Authority code:
Lock Door With Keypad
Press and hold down the (1 / 2) button for 1-2 seconds. An access code
is not needed to lock the door.
Unlock Door With Keypad
Entering a valid 5-digit access code provides a double beep and unlocks
the door.
Notes:
The authority code does not unlock the door. It is only used to
assign access codes (see page 5 for information on setting
authority and access codes).
If keypad does not provide double beep and does not unlock, a
valid access code has not been entered.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7 / 8 7 / 8 7 / 8 7 / 8 7 / 8
2
To Next Page
Loading...