Problem Description Possible Solution
e-FOB Hints
Button press does not provide
correct operation
Verify RF receiver is powered and active.
Re-teach the FOB transmitter to the
receiver.
No operation or intermittent
operation
Move RF receiver away from enclosed
metal areas and fully extend antennae.
Check FOB transmitter battery voltage.
Batteries need to be changed every 1-2
years depending on usage.
One particular e-FOB function
does not work
Check wire connection of affected
function at RF module, wiring harness,
and I/O module.
e-PAD Hints
No response with button press
Verify RF receiver is powered and active.
Verify that keypad cable is connected
and undamaged.
Access code is not recognized
Verify that code has not been changed.
Reassign keypad with instructions
starting on pages 11-12.
Make sure an access code is being used,
not the authority code.
Key FOB works correctly,
keypad beeps, but no output
Verify that the keypad and RF receiver
are using the same CAN protocol.
Unexpected, secure operation
occurs
Verify DIP switches are set to correct
configuration setting.
16
To Next Page
Loading...
