Trimec RT12 Series User Manual (English)

To Next Page

IMBT000-3210

I N S T R U C T I O N M A N U A L

BATTERY TOTALISER

Universal Mount Series

Declaration of Conformity

Trimec Industries Pty Ltd declares under sole responsibility that the products :

Flow Rate Totaliser model : RT12…, and Totaliser mo del : BT11

to w hich this declaration relates are in conformity with the standards noted below :

EN 50014 : 1997 + Amds. 1 & 2 I. S. Intrinsically safe electronics (optional) & there are no changes

required to enable compliance to the replacement standards EN 60079-0:2006 and EN 60079-1:2004.

EN 50020 : 2002 I.S. Intrinsically safe electronics (optional).

In addition & also applying to the model EB Batch Controller are the follow ing standards:

EN 60529 : 1991 Degrees of protection (IP)

EN 61326 : 1998 Industrial electromagnetic immunity & emissions

2002/96/EC Waste electrical & electronic equipment (WEEE).

Issued at Taren Point 28

January 2010. Signed for and on behalf of Trimec Industries Pty Ltd.

Wayne Fuller, Director

Need help?

Do you have a question about the Trimec RT12 Series and is the answer not in the manual?

Trimec RT12 Series Specifications

General

Process Connection	NPT, BSP, or Flanged
Operating Temperature	-40°F to +250°F (depending on model and fluid)
Flow Rate Range	0.1 to 150 GPM
Materials of Construction	Stainless Steel
Output Signal	Pulse, 4-20mA
Measurement Range	0.1 to 150 GPM
Display	LCD

Summary

Declaration of Conformity

INTRODUCTION

Specifications

Outlines the technical specifications including display, signal inputs, powering, pulse output types, physical characteristics, and configuration options.