Date: April 14, 2020 Doc No: PS-M-0871 Ver: B Page 14 of 21
Fig 2. Backsheet-Glass module with Single-axis Tracing System
1) M6 hex bolt M6 2) flat stainless washer
3) spring stainless washer 4) hex stainless nut
144 pcs Back sheet-
Glass Framed
Module
*NOTE: The above-described distance is
from the middle of the bolts to the middle
of the bolts
*NOTE: The actual load is + 2400Pa/-
2400Pa
D. 2V Installation Method
The single module is installed with two φ7*10mm mounting holes and two φ9*14mm mounting
holes, as shown in figure 3. The overall installation method is shown in the table below.
To Next Page
Loading...