Trio MC405 User Manual

(Please refer to the Motion Coordinator Technical Reference Manual for Full Details)
MOTION COORDINATOR
MC405
Quick Connection Guide
CAN PORT FOR TRIOCAN
I/O, DEVICENET SLAVE,
CANOPEN OR USER
PROGRAMMABLE
8 INPUTS INCLUDING
8 REGISTRATION INPUTS
8 BI-DIRECTIONAL I/O
2 ANALOGUE INPUTS AND
4 ANALOGUE OUTPUTS,
WDOG RELAY
LED DISPLAY AND
STATUS LED’S
A
Y AND
LED
’S
5 ENCODER CONNECTIONS
(6MHZ) OR DRIVE AS
STEPPER OUTPUT (2MHZ)
MICRO SD CARD
RS232 / RS485
MODBUS-RTU,
HOSTLINK OR USER
PROGRAMMABLE
MOTION
ETHERNET
PROGRAMMING, MODBUS-
TCP, ETHERNET IP
PANEL MOUNT AND DIN
RAIL MOUNT

Trio MC405 Specifications

General

Brand	Trio
Model	MC405
Category	Controller
Language	English

Summary

External Connectors

5-WAY CONNECTOR

Describes the 5-way connector for 24V power and I/O expansion.

RJ45 CONNECTOR

Details the RJ45 Ethernet port for programming and communication.

Serial Communication Interface

SERIAL CONNECTIONS

Explains serial port configurations for RS232/RS485 communication.

I/O Connector 1

Additional I/O Connectors

I/O CONNECTOR 2

Details connections for I/O channels 8-15 and 24V power.

I/O CONNECTOR 3

Describes terminals for WDOG, Analogue Inputs, and Analogue Outputs.

Amplifier Enable Output

AMPLIFIER ENABLE (WATCHDOG) RELAY OUTPUT

Explains the internal relay for enabling external amplifiers.

Analogue I/O Interfaces

ANALOGUE INPUTS

Details the range and connection for analogue inputs (0-10V).

ANALOGUE OUTPUTS

Describes the range and impedance for analogue outputs (+/-10V).

Stepper and Encoder Interfaces

STEPPER OUTPUTS / ENCODER INPUTS

Details pinouts for stepper outputs and encoder inputs.

Grounding and Shielding

GROUNDING AND SHIELDING

Provides essential guidelines for proper grounding and shielding.

LCD Display Information

LCD DISPLAY

Explains the device's LCD display for status and IP address.